logo
Main Page Sitemap

How to change ink slot for canon mg printer




how to change ink slot for canon mg printer

Lift the release lever and reload the paper.
Replace the head management sensor.
B Not enough space in the maintenance cartridge prior to cleaning Replace the maintenance cartridge.C Roll media loading size detection failure Reload the roll media.Prepare for parts replacement.F16 Mist fan error Check the mist fan.Lift the release lever and replace the roll.If you do, it may cause the cartridge to malfunction.Check to see if paper has not jammed in the printer.E196-4041 Flash memory erase error Replace the main controller PCB.E3A Madia load failure Check the pick-up unit and roll media.031A The job store executed when the free hard disk space left for Personal Boxes in the printers hard disk is full.



Parts counter W2 level After checking the parts counter in service mode, replace any part whose counter is nearing the error value.
Check paper size setting.
Borderless printng not possible.
Roll printing is selected, but sheets are loaded.Press OK to reformat 031A Hard disk format error Press the OK button to start reformatting the hard disk.E27 Paper jam during feeding/printing/ejection Reload the paper.Delete unwanted data on your computer to resume printing.Press Load/Eject and remove the roll.Low on the M ink tank (during pre-printing checks) Replace with a fully replenished M ink tank Ink insufficient.Roll printing is selected.BK ink tank near-empty Renew the BK ink tank.F31 Turn off printer, wait, then turn on again.F22 Pump travel timeout Check the purge unit.



A Maintenance cartridge near-full Replace the maintenance cartridge.
F25 Unable to detect the carriage motor home position Check the carriage unit.
F3C LF pressure error Check the pinch roller and surrounding part.

Sitemap